Verifying That Eee Is Saving Energy On Configured Ports - Juniper EX2200 Hardware Manual

Action
Meaning
Related
Documentation

Verifying That EEE Is Saving Energy on Configured Ports

Purpose
Action
Copyright © 2015, Juniper Networks, Inc.
Enter the following command:
show interfaces ae0 terse
user@switch>
Interface Admin
ae0 up
ae0.0 up
The output confirms that the ae0 link is up and shows the family and IP address assigned
to this link.
Configuring Aggregated Ethernet Links (CLI Procedure) on page 82
Configuring Aggregated Ethernet Interfaces (J-Web Procedure) on page 83
Example: Configuring Aggregated Ethernet High-Speed Uplinks Between an EX4200
Virtual Chassis Access Switch and an EX4200 Virtual Chassis Distribution Switch
Verify that enabling EEE saves energy on Base-T Copper Ethernet ports.
You can see the amount of energy saved by EEE on an EX Series switch using the
chassis power-budget-statistics
View the power budget of an EX Series switch before enabling EEE.
1.
On an EX6210 switch:
user@switch>show chassis power-budget-statistics
PSU 2 (EX6200-PWR-AC2500)
PSU 3
Total Power supplied by all Online PSUs
Power Redundancy Configuration
Power Reserved for the Chassis
Fan Tray Statistics
FTC 0
FPC Statistics
power Priority
FPC 3 (EX6200-48T)
0 W 9
FPC 4 (EX6200-SRE64-4XS)
0 W 0
FPC 5 (EX6200-SRE64-4XS)
0 W 0
FPC 7 (EX6200-48T)
0 W 9
FPC 8 (EX6200-48T)
0 W 9
Total (non-PoE) Power allocated
Total Power allocated for PoE
Power Available (Redundant case)
Total Power Available
On an EX4300 switch:
user@switch>show chassis power-budget-statistics fpc 1
Link Proto Local
up
up inet 10.10.10.2/24
command.
)
Base power
:
Base power
:
:
:
:
:
:
Chapter 4: Routine Monitoring
Remote
show
: 2500 W Online
: 0 W Offline
: 2500 W
: N+1
: 500 W
Power Used
300 W nan W
Power Used PoE
150 W 61.54 W
100 W 48.25 W
100 W 48.00 W
150 W 63.11 W
150 W 12.17 W
950 W
: 0 W
: 0 W
: 1550 W
235