Table 40: Protocol Families And Supported Interface Types - Juniper EX2200 Hardware Manual

Network Interfaces for EX4300 Switches
Options

Table 40: Protocol Families and Supported Interface Types

Family Description
ccc Circuit cross-connect protocol
family
Ethernet switching protocol family
ethernet-
switching
IPv4 protocol family
inet
IPv6 protocol family
inet6
Junos OS protocol family for IS-IS
iso
traffic
Required Privilege
Level
178
See Table 40 on page 178 for protocol families available on the switch interfaces. Different
protocol families support different subsets of the interface types on the switch.
Interface types on the switch are:
Aggregated Ethernet (
ae0
40-Gigabit Ethernet (
et
Gigabit Ethernet ( )
ge
Interface-range configuration (
Loopback ( )
lo0
Management Ethernet (
Integrated Routing and Bridging (IRB) interfaces (IRB) (
Virtual management Ethernet (
10-Gigabit Ethernet ( )
xe
If you are using an interface range, the supported protocol families are the ones supported
by the interface types that compose the range.
Not all interface types support all
supported substatements for a particular protocol family configuration.
Supported Interface Types
ae0
The remaining statements are explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
)
)
interface-range )
me0 )
vme )
family substatements. Check your switch CLI for
et ge irb lo0
)
irb
me0 vme xe
Copyright © 2015, Juniper Networks, Inc.