Level - Juniper EX2200 Hardware Manual

Network Interfaces for EX4300 Switches
Related
Documentation
106
alarm {
ethernet {
link-down (ignore | red | yellow);
}
management-ethernet {
link-down (ignore | red | yellow);
}
container-devices {
device-count device-count-number;
}
disk-partition {
/config {
level (full | high) {
free-space (free-space-threshold-value | mb | percent);
}
}
}
/var {
level (full | high) {
free-space (free-space-threshold-value | mb | percent);
}
}
}
}
fpc slot-number{
pic pic-number {
no-multi-rate;
q-pic-large-buffer (large-scale | small-scale);
}
}
}
maximum-ecmp maximum-ecmp-routes;
lcd-menu {
fpc slot-number {
menu-item menu-name);
disable;
pseudowire-service {
device-count device-count-number;
}
psu {
redundancy {
n-plus-n;
}
redundancy {
graceful-switchover;
}
slow-pfe-alarm;
}
Configuring Aggregated Ethernet Links (CLI Procedure) on page 82
Configuring the LCD Panel on EX Series Switches (CLI Procedure)
Configuring Graceful Routing Engine Switchover in a Virtual Chassis (CLI Procedure)
Configuring Power Supply Redundancy (CLI Procedure)
Copyright © 2015, Juniper Networks, Inc.