Table 53: Show Lacp Interfaces Output Fields - Juniper EX2200 Hardware Manual

Network Interfaces for EX4300 Switches

Table 53: show lacp interfaces Output Fields

Field Name Field Description
Aggregated interface Aggregated Ethernet interface name.
LACP State LACP state information for each aggregated Ethernet interface:
322
For a child interface configured with the
the interface name.
—Role played by the interface. It can be one of the following:
Role
—Local device participating in the LACP negotiation.
Actor
—Remote device participating in the LACP negotiation.
Partner
—Expired state. indicates that the actor or partner is in an expired state.
Exp Yes
the actor or partner is not in an expired state.
Def —Default. Yes indicates that the actor's receive machine is using the default operational partner
information, which is administratively configured for the partner.
partner information in use has been received in an LACP PDU.
Dist —Distribution of outgoing frames.
link is currently disabled and is not expected to be enabled. Otherwise, the value is
—Collection of incoming frames.
Col
link is currently enabled and is not expected to be disabled. Otherwise, the value is
—Synchronization. If the value is
Syn
been allocated to the correct link aggregation group, the group has been associated with a
compatible aggregator, and the identity of the link aggregation group is consistent with the system
ID and operational key information transmitted. If the value is
link is currently not in the right aggregation.
—Ability of the aggregation port to aggregate (
Aggr
( ).
No
Timeout —LACP timeout preference. Periodic transmissions of LACP PDUs occur at either a slow
or a fast transmission rate, depending upon the expressed LACP timeout preference (
or Short Timeout ).
—Actor's or partner's port activity.
Activity
LAC PDUs unless its partner's control value is
participate in the protocol regardless of the partner's control value.
statement, LACP state displays
force-up
No
No indicates that the distribution of outgoing frames on the
indicates that the collection of incoming frames on the
Yes
, the link is considered to be synchronized. The link has
Yes
, the link is not synchronized. The
No
) or to operate only as an individual link
Yes
indicates the port's preference for not transmitting
Passive
. indicates the port's preference to
Active Active
Copyright © 2015, Juniper Networks, Inc.
along with
FUP
indicates that
No
indicates that the operational
Yes .
.
No
Long Timeout