Juniper EX2200 Hardware Manual page 59

Junos osfor exseries ethernetswitches
Hide thumbs Also See for EX2200:
Table of Contents

Advertisement

Table 11: Port Edit Options (continued)
Field
Function
Port Mode
Specifies the mode of operation for the interface:
trunk or access.
Link Options
MTU (bytes)
Specifies the maximum transmission unit size
(MTU) for the interface.
Speed
Specifies the speed for the mode.
Duplex
Specifies the link mode.
Description
Describes the link.
NOTE:
If the interface is part of a link aggregation
group (LAG), only the
Other Port Edit options are unavailable.
Enable Auto
Enables or disables autonegotiation.
Negotiation
Enable Flow
Enables or disables flow control.
Control
Media Type
Specifies the media type selected.
Copyright © 2015, Juniper Networks, Inc.
option is enabled.
Description
Chapter 2: Configuration Tasks
Your Action
If you select
, you can:
Trunk
1.
Click
to add a VLAN member.
Add
2. Select the VLAN and click
3. (Optional) Associate a native VLAN with the interface.
4. Click
.
OK
If you select
, you can:
Access
1.
Select the VLAN member to be associated with the
interface.
2. (Optional) Associate a VoIP VLAN with the interface.
Only a VLAN with a VLAN ID can be associated as a
VoIP VLAN.
NOTE:
VoIP is not supported on EX8200 switches.
3. Click
.
OK
Type a value from
through
256
size for Gigabit Ethernet interfaces is
Select one of the following values:
, or
1000 Mbps
Auto-Negotiation.
NOTE:
EX4300 switches supports
apart from the values mentioned above.
10M-100M
Select one:
,
, or
automatic
half
NOTE:
Link mode
is not supported on EX4300
half
switches.
Enter a brief description for the link.
Select the check box to enable autonegotiation, or clear
the check box to disable it. By default, autonegotiation
is enabled.
Select the check box to enable flow control to regulate
the amount of traffic sent out of the interface, or clear
the check box to disable flow control and permit
unrestricted traffic. Flow control is enabled by default.
Select the check box to enable the media type. Then
select
or
.
Copper
Fiber
OK
.
. The default MTU
9216
.
1514
,
,
10 Mbps
100 Mbps
Auto-Negotiation
.
full
39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents