Table 6: Ipv4 And Ipv6 Hashing Fields - Juniper EX2200 Hardware Manual

Copyright © 2015, Juniper Networks, Inc.
Table 6 on page 13 displays the IPv4 and IPv6 payload fields that are used by the hashing
algorithm, by default.
—Field is used by the hashing algorithm, by default.
Χ—Field is not used by the hashing algorithm, by default.
(configurable)—Field can be configured to be used or not used by the hashing algorithm.

Table 6: IPv4 and IPv6 Hashing Fields

Fields
Source MAC
Destination MAC
EtherType
VLAN ID
Source IP or IPv6
Destination IP or IPv6
Protocol (IPv4 only)
Next header (IPv6 only)
Layer 4 Source Port
Layer 4 Destination Port
IPv6 Flow label (IPv6 only)
EX4300
LAG ECMP
Χ Χ
Χ Χ
Χ Χ
Χ Χ
(configurable) (configurable)
(configurable) (configurable)
(configurable) (configurable)
(configurable) (configurable)
(configurable) (configurable)
(configurable) (configurable)
(configurable) (configurable)
Χ Χ
Chapter 1: Interfaces Overview
QFX5100
LAG ECMP
Χ Χ
Χ Χ
Χ Χ
Χ Χ
(configurable) (configurable)
(configurable) (configurable)
(configurable) (configurable)
(configurable) (configurable)
(configurable) (configurable)
(configurable) (configurable)
(configurable) (configurable)
Χ Χ
13