Switches; Supported Statements In The [Edit Interfaces Irb] Hierarchy Level - Juniper EX2200 Hardware Manual

Network Interfaces for EX4300 Switches
[edit interfaces irb] Configuration Statement Hierarchy on EX Series Switches

Supported Statements in the [edit interfaces irb] Hierarchy Level

134
This topic lists supported and unsupported configuration statements in the
hierarchy level on EX Series switches.
irb]
Supported statements are those that you can use to configure some aspect of a
software feature on the switch.
Unsupported statements are those that appear in the command-line interface (CLI)
on the switch, but that have no effect on switch operation if you configure them.
Not all features are supported on all switch platforms. For detailed information about
feature support on specific EX Series switch platforms, see EX Series Switch Software
Features Overview.
This topic lists:
Supported Statements in the [edit interfaces irb] Hierarchy Level on page 134
Unsupported Statements in the [edit interfaces irb] Hierarchy Level on page 137
The following hierarchy shows the
on EX Series switches.
interfaces {
irb {
accounting-profile name;
description text;
disable;
(gratuitous-arp-reply
hold-time up milliseconds down milliseconds;
mtu bytes;
no-gratuitous-arp-request;
traceoptions {
flag flag;
}
(traps | no-traps);
unit logical-unit-number {
accounting-profile
bandwidth rate;
description text;
disable;
family inet {
accounting {
destination-class-usage;
source-class-usage {
input;
output;
}
}
address ipv4-address {
configuration statements supported
[edit interfaces irb]
| no-gratuitous-arp-reply);
name;
[edit interfaces
Copyright © 2015, Juniper Networks, Inc.