Unsupported Statements In The [Edit Interfaces Vme] Hierarchy Level; [Edit Interfaces Xe] Configuration Statement Hierarchy On Ex Series; Switches; Supported Statements In The [Edit Interfaces Xe] Hierarchy Level - Juniper EX2200 Hardware Manual

Unsupported Statements in the [edit interfaces vme] Hierarchy Level

Related
Documentation
[edit interfaces xe] Configuration Statement Hierarchy on EX Series Switches

Supported Statements in the [edit interfaces xe] Hierarchy Level

Copyright © 2015, Juniper Networks, Inc.
input policer-name;
output policer-name;
}
rpf-check;
}
family iso {
address interface-address;
mtu bytes;
}
family mpls {
mtu bytes;
}
(traps | no-traps);
vlan-id vlan-id-number;
}
vlan-tagging;
}
}
All statements in the [edit interfaces vme]
command-line interface (CLI) on the switch are supported on the switch and operate
as documented.
[edit interfaces] Configuration Statement Hierarchy on EX Series Switches
[edit interfaces] Configuration Statement Hierarchy on EX Series Switches on page 108
This topic lists supported and unsupported configuration statements in the
xe] hierarchy level on EX Series switches.
Supported statements are those that you can use to configure some aspect of a
software feature on the switch.
Unsupported statements are those that appear in the command-line interface (CLI)
on the switch, but that have no effect on switch operation if you configure them.
Not all features are supported on all switch platforms. For detailed information about
feature support on specific EX Series switch platforms, seeEX Series Switch Software
Features Overview
This topic lists:
Supported Statements in the [edit interfaces xe] Hierarchy Level on page 147
Unsupported Statements in the [edit interfaces xe] Hierarchy Level on page 151
The following hierarchy shows the
on EX Series switches.
Chapter 3: Configuration Statements
hierarchy level that are displayed in the
[edit interfaces xe] configuration statements supported
[edit interfaces
147