Vlan-Tagging - Juniper EX2200 Hardware Manual

vlan-tagging

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
vlan-tagging;
[edit interfaces interface-name],
[edit logical-systems logical-system-name interfaces interface-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 12.2 for ACX Series Universal Access Routers.
Statement introduced in Junos OS Release 13.2 for PTX Series Routers.
For Fast Ethernet and Gigabit Ethernet interfaces, aggregated Ethernet interfaces
configured for VPLS, and pseudowire subscriber interfaces, enable the reception and
transmission of 802.1Q VLAN-tagged frames on the interface.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Example: Configuring Layer 3 Subinterfaces for a Distribution Switch and an Access
Switch
Example: Configuring BGP Autodiscovery for LDP VPLS
Configuring a Layer 3 Subinterface (CLI Procedure) on page 97
Configuring Tagged Aggregated Ethernet Interfaces on page 96
Configuring Interfaces for VPLS Routing
Enabling VLAN Tagging
802.1Q VLANs Overview on page 26
vlan-id on page 228
Chapter 3: Configuration Statements
229