Unsupported Statements In The [Edit Interfaces Xe] Hierarchy Level; Table 39: Unsupported [Edit Interfaces Xe] Configuration Statements For Ex - Juniper EX2200 Hardware Manual

Unsupported Statements in the [edit interfaces xe] Hierarchy Level

Table 39: Unsupported [edit interfaces xe] Configuration Statements for EX Series Switches
Statement
clocking
framing
passive-monitor-mode
stacked-vlan-tagging
asynchronous-notification
ignore-l3-incompletes
mpls
source-address-filter
source-filtering
no-source-filtering
accept-source-mac
Copyright © 2015, Juniper Networks, Inc.
loose;
}
}
}
family iso {
address interface-address;
mtu bytes;
}
input-vlan-map action;
interface-shared-with psdnumerical-index;
output-vlan-map action;
proxy-arp (restricted | unrestricted);
swap-by-poppush;
(traps | no-traps);
vlan-id (VLAN Tagging and Layer 3 Subinterfaces)
vlan-id-list [vlan-id vlan-id–vlan-id];
}
vlan-tagging;
}
}
All statements in the [edit interfaces xe]
command-line interface (CLI) on the switch are supported on the switch and operate
as documented with the following exceptions:
Hierarchy
[edit interfaces xe]
[edit interfaces xe]
[edit interfaces xe]
[edit interfaces xe]
[edit interfaces xe ether-options]
[edit interfaces xe ether-options]
[edit interfaces xe ether-options]
[edit interfaces xe ether-options]
[edit interfaces xe ether-options]
[edit interfaces xe ether-options]
[edit interfaces xe unit]
Chapter 3: Configuration Statements
vlan-id-number;
hierarchy level that are displayed in the
151