Juniper EX2200 Hardware Manual page 174

Network Interfaces for EX4300 Switches
802.3ad
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
154
802.3ad {
aex;
(backup | primary);
lacp {
force-up;
port-priority
}
}
[edit interfaces interface-name ether-options]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure membership in a link aggregration group (LAG).
—Name of the LAG.
aex
—Designate the interface as the backup interface for link-protection mode.
backup
—Designate the interface as the primary interface for link-protection mode.
primary
The remaining statements are described separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Example: Configuring Aggregated Ethernet High-Speed Uplinks Between an EX4200
Virtual Chassis Access Switch and an EX4200 Virtual Chassis Distribution Switch
Example: Configuring Aggregated Ethernet High-Speed Uplinks with LACP Between an
EX4200 Virtual Chassis Access Switch and an EX4200 Virtual Chassis Distribution Switch
Example: Configuring Multicast Load Balancing for Use with Aggregated 10-Gigabit
Ethernet Interfaces on EX8200 Switches
Configuring Aggregated Ethernet Links (CLI Procedure) on page 82
Configuring Aggregated Ethernet LACP (CLI Procedure) on page 86
Configuring LACP Link Protection of Aggregated Ethernet Interfaces (CLI Procedure)
on page 87
Copyright © 2015, Juniper Networks, Inc.