Filter - Juniper EX2200 Hardware Manual

Network Interfaces for EX4300 Switches

filter

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
180
filter {
group filter-group-number;
input filter-name;
input-list [ filter-names ];
output filter-name;
output-list [ filter-names ];
}
[edit interfaces interface-name unit logical-unit-number family family],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
family family]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 11.1 for the QFX Series.
Apply a filter to an interface. You can also use filters for encrypted traffic. When you
configure filters, you can configure them under the
, or only.
mpls vpls
NOTE: On QFX3500 and QFX3600 switches running Enhanced Layer 2
Software, VPLS is not supported.
—Define an interface to be part of a filter group.
group filter-group-number
Range: 1 through 255
—Name of one filter to evaluate when packets are received on the
input filter-name
interface.
—Name of one filter to evaluate when packets are transmitted on the
output filter-name
interface.
The remaining statements are explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Applying a Filter to an Interface
Junos OS Services Interfaces Library for Routing Devices
Routing Policy Feature Guide for Routing Devices
Junos OS Administration Library for Routing Devices
Configuring Gigabit Ethernet Interfaces (CLI Procedure)
Configuring Gigabit Ethernet Interfaces (CLI Procedure) on page 32
,
family ethernet-switching
Copyright © 2015, Juniper Networks, Inc.
, ,
inet inet6