Unsupported Statements In The [Edit Interfaces Et] Hierarchy Level; Table 33: Unsupported [Edit Interfaces Et] Configuration Statements For Ex - Juniper EX2200 Hardware Manual

Network Interfaces for EX4300 Switches

Unsupported Statements in the [edit interfaces et] Hierarchy Level

Table 33: Unsupported [edit interfaces et] Configuration Statements for EX Series Switches
Statement
passive-monitor-mode
stacked-vlan-tagging
asynchronous-notification
ignore-l3-incompletes
mpls
source-address-filter
source-filtering
no-source-filtering
accept-source-mac
layer2-policer
native-inner-vlan-id
vlan-id-range
vlan-tags
118
}
family iso {
address interface-address;
mtu bytes;
}
input-vlan-map action;
output-vlan-map action;
proxy-arp (restricted | unrestricted);
swap-by-poppush;
(traps | no-traps);
vlan-id vlan-id-number;
vlan-id-list [vlan-id vlan-id–vlan-id];
}
vlan-tagging;
}
}
All statements in the [edit interfaces et]
command-line interface (CLI) on the switch are supported on the switch and operate
as documented with the following exceptions:
Hierarchy
[edit interfaces et]
[edit interfaces et]
[edit interfaces et ether-options]
[edit interfaces et ether-options]
[edit interfaces et ether-options]
[edit interfaces et ether-options]
[edit interfaces et ether-options]
[edit interfaces et ether-options]
[edit interfaces et unit]
[edit interfaces et unit]
[edit interfaces et unit]
[edit interfaces et unit]
[edit interfaces et unit]
hierarchy level that are displayed in the
Copyright © 2015, Juniper Networks, Inc.