Juniper EX2200 Hardware Manual page 302

Junos osfor exseries ethernetswitches
Hide thumbs Also See for EX2200:
Table of Contents

Advertisement

Network Interfaces for EX4300 Switches
Table 48: show interfaces ge- Output Fields (continued)
Field Name
Field Description
Name of the logical interface.
Logical interface
Index number of the logical interface, which reflects its initialization sequence.
Index
SNMP interface index number for the logical interface.
SNMP ifIndex
Unique number for use by Juniper Networks technical support only.
Generation
Information about the logical interface.
Flags
Encapsulation on the logical interface.
Encapsulation
Protocol family.
Protocol
Traffic statistics
Number and rate of bytes and packets received (input) and transmitted (output)
on the specified interface.
NOTE:
in
show interfaces
not include data traffic.
EX Series switches do not support the collection and reporting of IPv6 transit
IPv6 transit
statistics.
statistics
Local statistics
Number and rate of bytes and packets destined to and from the switch.
Number and rate of bytes and packets transiting the switch.
Transit statistics
Unique number for use by Juniper Networks technical support only.
Generation
Route table in which the logical interface address is located. For example,
Route Table
refers to the routing table
Names of any input filters applied to this interface.
Input Filters
Names of any output filters applied to this interface.
Output Filters
Information about protocol family flags.
Flags
If unicast reverse-path forwarding (RPF) is explicitly configured on the specified
interface, the uRPF flag is displayed. If unicast RPF was configured on a different
interface (and therefore is enabled on all switch interfaces) but was not explicitly
configured on the specified interface, the uRPF flag is not displayed even though
unicast RPF is enabled.
protocol-family
Protocol family configured on the logical interface. If the protocol is
address of the interface is also displayed.
Information about the address flags.
Flags
282
For logical interfaces on EX Series switches, the traffic statistics fields
commands show only control traffic; the traffic statistics do
inet.0
.
Level of Output
All levels
detail extensive
detail extensive
detail extensive
All levels
All levels
detail extensive
detail extensive
extensive
extensive
extensive
detail extensive
0
detail extensive
detail extensive
detail extensive
detail extensive
inet
, the IP
brief
detail extensive
Copyright © 2015, Juniper Networks, Inc.
none
none
none
none
none

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents