Juniper EX2200 Hardware Manual page 111

Copyright © 2015, Juniper Networks, Inc.
NOTE:
Member links of 50-Gigabit Ethernet can only be configured using the
50-Gigabit Ethernet interfaces of 100-Gigabit Ethernet PIC with CFP
(PD-1CE-CFP-FPC4).
Starting with Junos OS Release 13.2, 100-Gigabit Ethernet member links
can be configured using the two 50-Gigabit Ethernet interfaces of
100-Gigabit Ethernet PIC with CFP. This 100-Gigabit Ethernet member link
can be included in an aggregated Ethernet link that includes member links
of other interfaces as well. In releases before Junos OS Release 13.2, the
100-Gigabit Ethernet member link configured using the two 50-Gigabit
Ethernet interfaces of 100-Gigabit Ethernet PIC with CFP cannot be included
in an aggregated Ethernet link that includes member links of other
interfaces.
To configure member links of mixed rates and mixed modes on T640, T1600, T4000,
and TX Matrix Plus routers, you need to configure the
aex aggregated-ether-options link-speed
To set the required link speed:
Specify that you want to configure the aggregated Ethernet options.
1.
user@host# edit interfaces interface-name aggregated-ether-options
Configure the link speed.
2.
[edit interfaces interface-name aggregated-ether-options ]
user@host# set link-speed speed
speed can be in bits per second either as a complete decimal number or as a decimal
number followed by the abbreviation
Aggregated Ethernet interfaces on the M120 router can have one of the following
speeds:
—Links are 100 Mbps.
100m
—Links are 10 Gbps.
10g
1g —Links are 1 Gbps.
—Links are OC192 or STM64c.
oc192
Aggregated Ethernet links on EX Series switches can be configured to operate at one
of the following speeds:
—Links are 10 Mbps.
10m
—Links are 100 Mbps.
100m
—Links are 1 Gbps.
1g
10g —Links are 10 Gbps.
—Links are 50 Gbps.
50g
Chapter 2: Configuration Tasks
option for the [
mixed
] statement.
(1000), (1,000,000), or
k m
edit interfaces
(1,000,000,000).
g
91