Juniper EX2200 Hardware Manual page 130

Network Interfaces for EX4300 Switches
110
disable;
encapsulation type;
flexible-vlan-tagging;
(gratuitous-arp-reply | no-gratuitous-arp-reply);
mtu bytes;
native-vlan-id
no-gratuitous-arp-request;
traceoptions {
flag flag;
}
(traps | no-traps);
unit logical-unit-number {
accounting-profile name;
arp-resp (restricted | unrestricted);
bandwidth rate;
description text;
disable;
encapsulation type;
family ccc {
filter {
group group-number;
input filter-name;
input-list [filter-names];
output filter-name;
output-list [filter-names];
}
policer {
input policer-name;
output policer-name;
}
}
family ethernet-switching {
filter {
input filter-name;
output filter-name;
}
interface-mode (access | trunk);
recovery-timeout seconds;
storm-control profile-name;
vlan {
members [members];
}
}
family inet {
accounting {
destination-class-usage;
source-class-usage {
input;
output;
}
address ipv4-address {
arp ip-address (mac | multicast-mac) mac-address <publish>;
broadcast address;
preferred;
primary;
vrrp-group group-number {
Copyright © 2015, Juniper Networks, Inc.