Vlan-Id (Vlan Tagging And Layer 3 Subinterfaces) - Juniper EX2200 Hardware Manual

Network Interfaces for EX4300 Switches

vlan-id (VLAN Tagging and Layer 3 Subinterfaces)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
228
vlan-id vlan-id-number;
[edit interfaces interface-name
Statement introduced in Junos OS Release 9.2 for EX Series switches.
Bind an 802.1Q VLAN tag ID to a logical interface.
NOTE: The VLAN tag ID cannot be configured on logical interface unit
logical unit number must be
vlan-id-number —A valid VLAN identifier.
Range: 1 through 4094
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
vlan-tagging on page 229
Example: Configuring Layer 3 Subinterfaces for a Distribution Switch and an Access
Switch
Configuring Gigabit Ethernet Interfaces (CLI Procedure)
Configuring Gigabit Ethernet Interfaces (CLI Procedure) on page 32
Configuring Gigabit Ethernet Interfaces (J-Web Procedure) on page 35
Configuring a Layer 3 Subinterface (CLI Procedure) on page 97
Configuring Q-in-Q Tunneling (CLI Procedure)
Junos OS Ethernet Interfaces Configuration Guide
unit logical-unit-number]
or higher.
1
Copyright © 2015, Juniper Networks, Inc.
. The
0