Juniper EX2200 Hardware Manual page 323

Table 51: show interfaces queue Output Fields (continued)
Field Name
Transmitted
Packet Forwarding Engine Chassis Queues
Sample Output
show interfaces queue ge-0/0/0 (EX2200 Switch)
Copyright © 2015, Juniper Networks, Inc.
Field Description
Number of packets and bytes transmitted by this queue. Information on
transmitted packets and bytes can include:
Packets
—Number of bytes transmitted.
Bytes
Tail-dropped packets
queue buffers were full.
RED-dropped packets
detection (RED).
Low
High
RED-dropped bytes
detection (RED).
Low
High
For an interface on a line card with oversubscribed ports, the number of Packet
Forwarding Engine chassis queues supported and in use for the port group to
which the interface belongs. The queue statistics reflect the traffic flowing on
all the interfaces in the port group.
user@switch> show interfaces queue ge–0/0/0
Physical interface: ge-0/0/0, Enabled, Physical link is Down
Interface index: 130, SNMP ifIndex: 501
Forwarding classes: 16 supported, 4 in use
Egress queues: 8 supported, 4 in use
Queue: 0, Forwarding classes: best-effort
Queued:
Transmitted:
Packets
Bytes
Tail-dropped packets :
Queue: 1, Forwarding classes: assured-forwarding
Queued:
Transmitted:
Packets
Bytes
Tail-dropped packets :
Queue: 5, Forwarding classes: expedited-forwarding
Queued:
Transmitted:
Packets
Bytes
Tail-dropped packets :
Queue: 7, Forwarding classes: network-control
Queued:
Transmitted:
Packets
—Number of packets transmitted.
—Number of arriving packets dropped because output
—Number of packets dropped because of random early
—Number of low loss priority packets dropped because of RED.
—Number of high loss priority packets dropped because of RED.
—Number of bytes dropped because of random early
—Number of low loss priority bytes dropped because of RED.
—Number of high loss priority bytes dropped because of RED.
: 0
: 0
0
: 0
: 0
0
: 0
: 0
0
: 0
Chapter 5: Operational Commands
303