Configuring Aggregated Ethernet Minimum Links - Juniper EX2200 Hardware Manual

Network Interfaces for EX4300 Switches
Related
Documentation

Configuring Aggregated Ethernet Minimum Links

92
Aggregated Ethernet links on T Series routers can be configured to operate at one of
the following speeds:
—Links are 100 Gbps.
100g
100m —Links are 100 Mbps.
—Links are 10 Gbps.
10g
1g —Links are 1 Gbps.
—Links are 40 Gbps.
40g
50g —Links are 50 Gbps.
—Links are 80 Gbps.
80g
8g —Links are 8 Gbps.
—Links are of various speeds.
mixed
—Links are OC192.
oc192
aggregated-ether-options
Configuring Mixed Aggregated Ethernet Links
Ethernet Interfaces
On aggregated Ethernet interfaces, you can configure the minimum number of links that
must be up for the bundle as a whole to be labeled
up for the bundle to be labeled
To configure the minimum number of links:
Specify that you want to configure the aggregated Ethernet options.
1.
user@host# edit interfaces interface-name aggregated-ether-options
Configure the minimum number of links.
2.
[edit interfaces interface-name aggregated-ether-options]
user@host# set minimum-links number
On M120, M320, MX Series, T Series, and TX Matrix routers with Ethernet interfaces, and
EX 9200 switches, the valid range for
maximum value (16) is specified, all configured links of a bundle must be up for the bundle
to be labeled .
up
On all other routers and on EX Series switches, other than EX8200 switches, the range
of valid values for minimum-links number
specified, all configured links of a bundle must be up for the bundle to be labeled
. By default, only one link must be
up
up .
minimum-links number
is 1 through 8. When the maximum value (8) is
Copyright © 2015, Juniper Networks, Inc.
is 1 through 16. When the
.
up