Juniper EX2200 Hardware Manual page 229

Required Privilege
Level
Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
NOTE: Since VLAN members are limited, specifying
number of VLAN members to exceed the limit at some point.
names —Name of one or more VLANs. VLAN IDs are applied automatically in this case.
NOTE: cannot be a VLAN name.
all
—Numeric identifier of one or more VLANs. For a series of tagged VLANs, specify
vlan-ids
a range; for example,
10–20
NOTE: Each configured VLAN must have a specified VLAN ID to successfully
commit the configuration; otherwise, the configuration commit fails.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
show ethernet-switching interfaces
show ethernet-switching interface
show vlans
Example: Setting Up Basic Bridging and a VLAN for an EX Series Switch
Example: Setting Up Basic Bridging and a VLAN for an EX Series Switch
Example: Connecting an Access Switch to a Distribution Switch
Example: Connecting Access Switches to a Distribution Switch
Configuring Gigabit Ethernet Interfaces (CLI Procedure)
Configuring Gigabit Ethernet Interfaces (CLI Procedure) on page 32
Configuring Gigabit Ethernet Interfaces (J-Web Procedure) on page 35
Configuring VLANs for EX Series Switches (CLI Procedure)
Configuring VLANs for EX Series Switches (CLI Procedure)
Creating a Series of Tagged VLANs (CLI Procedure)
Understanding Bridging and VLANs on EX Series Switches
Junos OS Ethernet Interfaces Configuration Guide
Chapter 3: Configuration Statements
or .
10–20 23 27–30
all could cause the
209