Show Lacp Interfaces - Juniper EX2200 Hardware Manual

show lacp interfaces

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Copyright © 2015, Juniper Networks, Inc.
show lacp interfaces
<interface-name>
Command introduced in Junos OS Release 10.0 for EX Series switches.
Command introduced in Junos OS Release 11.1 for the QFX Series.
Display Link Aggregation Control Protocol (LACP) information about the specified
aggregated Ethernet or Gigabit Ethernet interface.
none—Display LACP information for all interfaces.
—(Optional) Display LACP information for the specified interface:
interface-name
Aggregated Ethernet— aex
Gigabit Ethernet—
ge-fpc/pic/port
10-Gigabit Ethernet— xe-fpc/pic/port
view
Example: Configuring Aggregated Ethernet High-Speed Uplinks Between an EX4200
Virtual Chassis Access Switch and an EX4200 Virtual Chassis Distribution Switch
Example: Configuring Aggregated Ethernet High-Speed Uplinks with LACP Between an
EX4200 Virtual Chassis Access Switch and an EX4200 Virtual Chassis Distribution Switch
Example: Configuring Link Aggregation Between a QFX Series Product and an Aggregation
Switch
Configuring Aggregated Ethernet Links (CLI Procedure) on page 82
Configuring Link Aggregation
Configuring Aggregated Ethernet LACP (CLI Procedure) on page 86
Configuring Aggregated Ethernet LACP
Configuring LACP Link Protection of Aggregated Ethernet Interfaces (CLI Procedure)
on page 87
Understanding Aggregated Ethernet Interfaces and LACP on page 8
Understanding Aggregated Ethernet Interfaces and LACP
Junos OS Interfaces Fundamentals Configuration Guide
show lacp interfaces (EX Series Switches) on page 323
show lacp interfaces (QFX Series) on page 324
Table 53 on page 322 lists the output fields for the
fields are listed in the approximate order in which they appear.
Chapter 5: Operational Commands
command. Output
show lacp interfaces
321