Supported Statements In The [Edit Interfaces Ge] Hierarchy Level - Juniper EX2200 Hardware Manual

Network Interfaces for EX4300 Switches

Supported Statements in the [edit interfaces ge] Hierarchy Level

120
Unsupported statements are those that appear in the command-line interface (CLI)
on the switch, but that have no effect on switch operation if you configure them.
Not all features are supported on all switch platforms. For detailed information about
feature support on specific EX Series switch platforms, see EX Series Switch Software
Features Overview.
This topic lists:
Supported Statements in the [edit interfaces ge] Hierarchy Level on page 120
Unsupported Statements in the [edit interfaces ge] Hierarchy Level on page 124
The following hierarchy shows the
on EX Series switches.
interfaces {
ge-fpc/pic/port {
accounting-profile name;
description text;
disable;
encapsulation type;
ether-options {
802.3ad {
aex;
(backup | primary);
lacp {
force-up;
port-priority number;
}
}
(auto-negotiation | no-auto-negotiation);
ethernet-switch-profile {
tag-protocol-id [tpids];
}
(flow-control | no-flow-control);
ieee-802-3az-eee;
(loopback | no-loopback);
no-auto-mdix;
}
flexible-vlan-tagging;
(gratuitous-arp-reply
hold-time up milliseconds down milliseconds;
link-mode {
full-duplex;
}
mtu bytes;
native-vlan-id
no-gratuitous-arp-request;
speed speed;
traceoptions {
flag flag;
}
(traps | no-traps);
configuration statements supported
[edit interfaces ge]
| no-gratuitous-arp-reply);
Copyright © 2015, Juniper Networks, Inc.