Aggregated-Ether-Options - Juniper EX2200 Hardware Manual

aggregated-ether-options

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
aggregated-ether-options {
ethernet-switch-profile {
tag-protocol-id;
}
(flow-control | no-flow-control);
lacp {
(active | passive);
admin-key key;
periodic interval;
system-id mac-address;
}
(link-protection | no-link-protection);
link-speed speed;
local-bias;
logical-interface-fpc-redundancy;
(loopback | no-loopback);
minimum-links number;
system-priority
}
[edit interfaces aex]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 12.3R2.
Configure the aggregated Ethernet properties of a specific aggregated Ethernet interface.
The remaining statements are explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Example: Configuring Aggregated Ethernet High-Speed Uplinks Between an EX4200
Virtual Chassis Access Switch and an EX4200 Virtual Chassis Distribution Switch
Example: Configuring Aggregated Ethernet High-Speed Uplinks with LACP Between an
EX4200 Virtual Chassis Access Switch and an EX4200 Virtual Chassis Distribution Switch
Configuring Aggregated Ethernet Links (CLI Procedure) on page 82
Configuring Aggregated Ethernet LACP (CLI Procedure) on page 86
Configuring LACP Link Protection of Aggregated Ethernet Interfaces (CLI Procedure)
on page 87
Configuring Q-in-Q Tunneling (CLI Procedure)
Junos OS Ethernet Interfaces Configuration Guide
Chapter 3: Configuration Statements
159