Disabling The Transmission Of Redirect Messages On An Interface; Configuring Restricted And Unrestricted Proxy Arp - Juniper EX2200 Hardware Manual

Network Interfaces for EX4300 Switches
Related
Documentation

Disabling the Transmission of Redirect Messages on an Interface

Configuring Restricted and Unrestricted Proxy ARP

80
arp 10.10.0.99 mac 0001.0002.0003;
arp 10.10.0.101 mac 00:11:22:33:44:55 publish;
}
}
}
}
Management Ethernet Interface Overview
EX Series Switches Interfaces Overview on page 3
Applying Policers
Configuring an Unnumbered Interface
Ethernet Interfaces
By default, the interface sends protocol redirect messages. To disable the sending of
these messages on an interface, include the
no-redirects;
You can include this statement at the following hierarchy levels:
[edit interfaces interface-name unit logical-unit-number family family]
[edit logical-systems logical-system-name interfaces interface-name unit
logical-unit-number family family]
To disable the sending of protocol redirect messages for the entire router or switch,
include the no-redirects statement at the
To configure restricted or unrestricted proxy ARP, include the
proxy-arp (restricted |unrestricted);
You can include this statement at the following hierarchy levels:
[edit interfaces interface-name unit logical-unit-number ]
[edit logical-systems logical-system-name interfaces interface-name unit
logical-unit-number]
To return to the default—that is, to disable restricted or unrestricted proxy ARP—delete
the proxy-arp statement from the configuration:
[edit]
user@host# delete interfaces interface-name unit logical-unit-number proxy-arp
You can track the number of restricted or unrestricted proxy ARP requests processed by
the router or switch by issuing the
statement:
no-redirects
[edit system] hierarchy level.
show system statistics arp operational mode command.
Copyright © 2015, Juniper Networks, Inc.
statement:
proxy-arp