Ether-Options - Juniper EX2200 Hardware Manual

Network Interfaces for EX4300 Switches

ether-options

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
172
ether-options {
802.3ad {
aex;
(backup | primary);
lacp {
force-up;
port-priority
}
}
(auto-negotiation | no-auto-negotiation);
ethernet-switch-profile {
tag-protocol-id;
}
(flow-control | no-flow-control);
ieee-802-3az-eee;
link-mode mode;
(loopback | no-loopback);
speed (speed | auto-negotiation);
}
[edit interfaces interface-name],
[edit interfaces interface-range range]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 12.3R2.
Configure Ethernet properties for a Gigabit Ethernet interface or a 10-Gigabit Ethernet
interface.
The remaining statements are explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Gigabit Ethernet Interfaces (CLI Procedure)
Configuring Gigabit Ethernet Interfaces (CLI Procedure) on page 32
Configuring Gigabit Ethernet Interfaces (J-Web Procedure) on page 35
Configuring LACP Link Protection of Aggregated Ethernet Interfaces (CLI Procedure)
on page 87
Configuring Q-in-Q Tunneling (CLI Procedure)
Junos OS Ethernet Interfaces Configuration Guide
Copyright © 2015, Juniper Networks, Inc.