Figure 8: Leds On The Uplink Ports; Table 8: Link/Activity Led On The Network Ports And Uplink Ports In Ex3300 - Juniper EX3300 Complete Hardware Manual

Complete Hardware Guide for EX3300 Ethernet Switches
Table 8: Link/Activity LED on the Network Ports and Uplink Ports in EX3300 Switches
LED Color
Link/Activity Green
18

Figure 8: LEDs on the Uplink Ports

Port 1
Port 0
EX3300 PoE+
ALM
SYS
MST
0 1 2 3
Link/Activity Status Port 2 Port 3
LED LED
Table 8 on page 18 describes the Link/Activity LED.
State and Description
Blinking—The port and the link are active, and there is link activity.
On steadily—The port and the link are active, but there is no link activity.
Off—The port is not active.
The LEDs labeled Status LED in
status of one of the four port parameters—speed, administrative status, duplex mode,
and Power over Ethernet Plus (PoE+) status. From the Idle menu of the LCD, use the
button on the LCD panel to toggle between the SPD, ADM, DPX, and POE, indicators.
Enter
Table 10 on page 20 describes the Status LED on the network ports and table describes
the Status LED on the uplink ports.
Figure 7 on page 17 and Figure 8 on page 18
Copyright © 2015, Juniper Networks, Inc.
indicate the