Native-Vlan-Id - Juniper EX2200 Hardware Manual

native-vlan-id

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
native-vlan-id number;
[edit interfaces ge-fpc/pic/port],
[edit interfaces interface-name]
Statement introduced in Junos OS Release 8.3.
Statement introduced in Junos OS Release 12.2 for ACX Series Universal Access Routers.
Statement introduced in Junos OS Release 12.3R2 for EX Series switches.
Statement introduced in Junos OS Release 13.2X51-D20 for the QFX Series.
Configure mixed tagging support for untagged packets on a port for the following:
M Series routers with Gigabit Ethernet IQ PICs with SFP and Gigabit Ethernet IQ2 PICs
with SFP configured for 802.1Q flexible VLAN tagging
MX Series routers with Gigabit Ethernet DPCs and MICs, Tri-Rate Ethernet DPCs and
MICs, and 10-Gigabit Ethernet DPCs and MICs and MPCs configured for 802.1Q flexible
VLAN tagging
T4000 routers with 100-Gigabit Ethernet Type 5 PIC with CFP
EX Series switches with Gigabit Ethernet, 10-Gigabit Ethernet, 40-Gigabit Ethernet,
and aggregated Ethernet interfaces
When the statement is included with the flexible-vlan-tagging statement,
native-vlan-id
untagged packets are accepted on the same mixed VLAN-tagged port.
The logical interface on which untagged packets are received must be configured with
the same VLAN ID as the native VLAN ID configured on the physical interface. To configure
the logical interface, include the
on the physical interface) at the
hierarchy level.
When the statement is included with the
native-vlan-id
untagged packets are accepted and forwarded within the bridge domain or VLAN that
is configured with the matching VLAN ID.
number —VLAN ID number.
Range: (ACX Series routers and EX Series switches) 0 through 4094.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Mixed Tagging Support for Untagged Packets
Configuring a Logical Interface for Access Mode
Configuring the Native VLAN Identifier (CLI Procedure)
Understanding Bridging and VLANs on EX Series Switches
Chapter 3: Configuration Statements
statement (matching the
vlan-id
[edit interfaces interface-name unit logical-unit-number]
interface-mode
statement
native-vlan-id
statement,
213