Arp (Interfaces) - Juniper EX2200 Hardware Manual

Network Interfaces for EX4300 Switches

arp (Interfaces)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
160
arp ip-address (mac | multicast-mac) mac-address publish;
[edit interfaces interface-name unit logical-unit-numberfamily inetaddress address],
[edit logical-systems logical-system-name interfaces interface-nameunit logical-unit-number
family inetaddress address]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 11.1 for the QFX Series.
For Ethernet, Fast Ethernet, and Gigabit Ethernet interfaces only, configure Address
Resolution Protocol (ARP) table entries, mapping IP addresses to MAC addresses.
—IP address to map to the MAC address. The IP address specified must be
ip-address
part of the subnet defined in the enclosing
mac mac-address —MAC address to map to the IP address. Specify the MAC address as
six hexadecimal bytes in one of the following formats:
. For example,
nn:nn:nn:nn:nn:nn
multicast-mac mac-address
the multicast MAC address as six hexadecimal bytes in one of the following formats:
or
nnnn.nnnn.nnnn nn:nn:nn:nn:nn:nn
—(Optional) Have the router or switch reply to ARP requests for the specified IP
publish
address. If you omit this option, the router or switch uses the entry to reach the
destination but does not reply to ARP requests.
NOTE: The
edit logical-systems
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Static ARP Table Entries on page 79
Configuring Static ARP Entries
address
or
0011.2233.4455
—Multicast MAC address to map to the IP address. Specify
. For example,
0011.2233.4455
hierarchy is not available on QFabric systems.
statement.
or
nnnn.nnnn.nnnn
.
00:11:22:33:44:55
or
00:11:22:33:44:55
Copyright © 2015, Juniper Networks, Inc.
.