Lacp (802.3Ad) - Juniper EX2200 Hardware Manual

lacp (802.3ad)

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
lacp {
force-up;
port-priority
}
[edit interfaces interface-name ether-options 802.3ad]
[edit interfaces aeX aggregated-ether-options]
[edit chassis aggregated-devices ethernet]
Statement introduced in Junos OS Release 10.0 for EX Series switches.
Support for LACP link protection introduced in Junos OS Release 11.4 for EX Series
switches.
Configure the Link Aggregation Control Protocol (LACP) parameters for aggregated
Ethernet interfaces on the global level (for all the aggregated Ethernet interfaces on the
switch) or for a specific aggregated Ethernet interface.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Example: Configuring Aggregated Ethernet High-Speed Uplinks Between an EX4200
Virtual Chassis Access Switch and an EX4200 Virtual Chassis Distribution Switch
Example: Configuring Aggregated Ethernet High-Speed Uplinks with LACP Between an
EX4200 Virtual Chassis Access Switch and an EX4200 Virtual Chassis Distribution Switch
Configuring Aggregated Ethernet Links (CLI Procedure) on page 82
Configuring Aggregated Ethernet LACP (CLI Procedure) on page 86
Configuring LACP Link Protection of Aggregated Ethernet Interfaces (CLI Procedure)
on page 87
Understanding Aggregated Ethernet Interfaces and LACP on page 8
Junos OS Ethernet Interfaces Configuration Guide
Chapter 3: Configuration Statements
197