Juniper EX2200 Hardware Manual page 334

Network Interfaces for EX4300 Switches
Table 52: show interfaces xe- Output Fields (continued)
Field Name Field Description
Scheduler information for the CoS egress queues on the physical interface:
CoS Information
Direction
CoS transmit queue
forwarding class name.
Bandwidth
%
bps
Buffer
%
usec
nonzero only if the buffer size is configured in terms of time.
Priority
Limit
are
none
configured bandwidth, even if excess bandwidth is available. If
configured, the queue transmits beyond the configured bandwidth if
bandwidth is available.
Fields for MACsec statistics
The number of packets sent from the interface that were secured using MACsec
Protected Packets
when encryption was disabled.
The number of packets sent from the interface that were secured and encrypted
Encrypted Packets
using MACsec.
The number of bytes sent from the interface that were secured using MACsec,
Protected Bytes
but not encrypted.
The number of packets sent from the interface that were secured and encrypted
Encrypted Bytes
using MACsec.
The number of received packets that have been accepted on the interface. A
Accepted Packets
packet is considered accepted for this counter when it has been received by
this interface and it has passed the MACsec integrity check.
This counter increments for traffic that is and is not encrypted using MACsec.
The number of bytes that have been validated by the MACsec integrity check
Validated Bytes
and received on the interface.
This counter does not increment when MACsec encryption is disabled.
Decrypted Bytes The number of bytes received on the interface that have been decrypted. An
encrypted byte has to be decrypted before it can be received on the receiving
interface. The decrypted bytes counter is incremented for received traffic that
was encrypted using MACSec.
Fields for Logical Interfaces
314
—Queue direction, always
—Queue number and its associated user-configured
—Information about bandwidth allocated to the queue:
—Bandwidth allocated to the queue as a percentage
—Bandwidth allocated to the queue in bps
—Information about buffer space allocated to the queue:
—Buffer space allocated to the queue as a percentage.
—Buffer space allocated to the queue in microseconds. This value is
—Queue priority: or
low high
—Displayed if rate limiting is configured for the queue. Possible values
and . If is configured, the queue transmits only up to the
exact exact
.
Output
.
none
Level of Output
extensive
is
detail
extensive
detail
extensive
detail
extensive
detail
extensive
detail
extensive
detail
extensive
detail
extensive
Copyright © 2015, Juniper Networks, Inc.