Table 42: Output Control Keys For The Monitor Interface Traffic Command - Juniper EX2200 Hardware Manual

Required Privilege
Level
List of Sample Output
Output Fields
Copyright © 2015, Juniper Networks, Inc.
Table 41: Output Control Keys for the monitor interface
Command (continued)
Key Action
n Displays information about the next interface. The
displays the physical or logical interfaces in the same order as the
terse command.
q or Esc Quits the command and returns to the command prompt.
t Thaws the display, resuming the update of the statistics and delta counters.
To control the output of the
the keys listed in Table 42 on page

Table 42: Output Control Keys for the monitor interface traffic Command

Key Action
b Displays the statistics in units of bytes and bytes per second (Bps).
c Clears (return to 0) the delta counters in the
counters are not cleared.
d Displays the
per second (pps).
p Displays the statistics in units of packets and packets per second (pps).
q or Esc Quits the command and returns to the command prompt.
r Displays the rate column (instead of the
trace
monitor interface (Physical) on page 247
monitor interface (OTN Interface) on page 248
monitor interface (Logical) on page 249
monitor interface (QFX3500 Switch) on page 249
monitor interface traffic on page 250
monitor interface traffic (QFX3500 Switch) on page 250
monitor interface traffic detail (QFX3500 Switch) on page 251
Table 43 on page 246 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
command while it is running, use
monitor interface traffic
245. The keys are not case-sensitive.
Current Delta column (instead of the rate column) in Bps or packets
Current Delta
Chapter 5: Operational Commands
command
monitor interface
show interfaces
column. The statistics
Current Delta
column) in Bps and pps.
monitor interface command.
245