Link-Speed (Aggregated Ethernet) - Juniper EX2200 Hardware Manual

link-speed (Aggregated Ethernet)

Syntax
Hierarchy Level
Release Information
Description
Options
Copyright © 2015, Juniper Networks, Inc.
link-speed speed;
[edit interfaces aex aggregated-ether-options],
[edit interfaces interface-range name aggregated-ether-options],
[edit interfaces interface-range name aggregated-sonet-options]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
For aggregated Ethernet interfaces only, set the required link speed.
speed —For aggregated Ethernet links, you can specify
a complete decimal number or as a decimal number followed by the abbreviation
(1000), (1,000,000), or
k m
Aggregated Ethernet links on the M120 router can have one of the following speeds:
—Links are 100 Mbps.
100m
—Links are 10 Gbps.
10g
—Links are 1 Gbps.
1g
—Links are OC192 or STM64c.
oc192
Aggregated Ethernet links on EX Series switches can be configured to operate at one of
the following speeds:
—Links are 10 Mbps.
10m
—Links are 100 Mbps.
100m
—Links are 1 Gbps.
1g
—Links are 10 Gbps.
10g
Aggregated Ethernet links on T Series routers can be configured to operate at one of the
following speeds:
—Links are 100 Gbps.
100g
—Links are 100 Mbps.
100m
—Links are 10 Gbps.
10g
—Links are 1 Gbps.
1g
—Links are 40 Gbps.
40g
—Links are 50 Gbps.
50g
80g —Links are 80 Gbps.
—Links are 8 Gbps.
8g
Chapter 3: Configuration Statements
speed
(1,000,000,000).
g
in bits per second either as
203