Table 52: Show Interfaces Xe- Output Fields - Juniper EX2200 Hardware Manual

Network Interfaces for EX4300 Switches
List of Sample Output
Output Fields

Table 52: show interfaces xe- Output Fields

Field Name Field Description
Fields for the Terse Output Level Only
Interface Name of the physical or logical interface.
Admin Administrative state of the interface.
Link State of the physical link.
Protocol family configured on the logical interface.
Proto
Local IP address of the logical interface.
Local
Remote IP address of the logical interface.
Remote
Fields for the Physical Interface
Physical interface Name of the physical interface.
State of the interface. Can be one of the following:
Enabled
Administratively down, Physical link is Down
the physical link is inoperable and cannot pass packets even when it is
enabled.
Administratively down, Physical link is Up
physical link is operational and can pass packets when it is enabled.
Enabled, Physical link is Down
link is inoperable and cannot pass packets.
Enabled, Physical link is Up
is operational and can pass packets.
Index number of the physical interface, which reflects its initialization sequence.
Interface index
SNMP index number for the physical interface.
SNMP ifIndex
Unique number for use by Juniper Networks technical support only.
Generation
308
show interfaces xe-4/1/0 on page 316
show interfaces xe-0/1/0 brief on page 317
show interfaces xe-4/1/0 detail on page 317
show interfaces xe-6/0/39 extensive on page 318
Table 52 on page 308 lists the output fields for the
fields are listed in the approximate order in which they appear.
—The interface is turned on, but the physical
—The interface is turned on, and the physical link
show interfaces xe-
—The interface is turned off, and
—The interface is turned off, but the
Copyright © 2015, Juniper Networks, Inc.
command. Output
Level of Output
terse
terse
terse
terse
terse
terse
brief
detail
extensive
none
brief
detail
extensive
none
detail
extensive
none
detail
extensive
none
detail
extensive