Supported Statements In The [Edit Interfaces Me] Hierarchy Level - Juniper EX2200 Hardware Manual

Supported Statements in the [edit interfaces me] Hierarchy Level

Copyright © 2015, Juniper Networks, Inc.
Supported statements are those that you can use to configure some aspect of a
software feature on the switch.
Unsupported statements are those that appear in the command-line interface (CLI)
on the switch, but that have no effect on switch operation if you configure them.
Not all features are supported on all switch platforms. For detailed information about
feature support on specific EX Series switch platforms, see EX Series Switch Software
Features Overview.
This topic lists:
Supported Statements in the [edit interfaces me] Hierarchy Level on page 141
Unsupported Statements in the [edit interfaces me] Hierarchy Level on page 143
The following hierarchy shows the
on EX Series switches.
interfaces {
me0 {
accounting-profile name;
description text;
disable;
(gratuitous-arp-reply
hold-time up milliseconds down milliseconds;
no-gratuitous-arp-request;
traceoptions {
flag flag;
}
(traps | no-traps);
unit logical-unit-number {
accounting-profile
arp-resp;
bandwidth rate;
description text;
disable;
family ethernet-switching {
filter {
input filter-name;
output filter-name;
}
native-vlan-id vlan-id-number;
port-mode (access | trunk);
vlan {
members [ members];
}
}
family inet {
accounting {
destination-class-usage;
source-class-usage {
input;
output;
[edit interfaces me]
| no-gratuitous-arp-reply);
name;
Chapter 3: Configuration Statements
configuration statements supported
141