Flow-Control - Juniper EX2200 Hardware Manual

flow-control

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
Configuring Firewall Filters (CLI Procedure)
Configuring Firewall Filters and Policers for VPLS
family
family on page 174
(flow-control | no-flow-control);
[edit interfaces interface-name aggregated-ether-options],
[edit interfaces interface-name ether-options],
[edit interfaces interface-name fastether-options],
[edit interfaces interface-name gigether-options],
[edit interfaces interface-name multiservice-options],
[edit interfaces interface-range name aggregated-ether-options],
[edit interfaces interface-range name ether-options]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 in EX Series switches.
Statement introduced in Junos OS Release 12.2 for ACX Series Universal Access Routers.
For aggregated Ethernet, Fast Ethernet, and Gigabit Ethernet interfaces only, explicitly
enable flow control, which regulates the flow of packets from the router or switch to the
remote side of the connection. Enabling flow control is useful when the remote device
is a Gigabit Ethernet switch. Flow control is not supported on the 4-port Fast Ethernet
PIC.
NOTE: On the Type 5 FPC, to prioritize control packets in case of ingress
oversubscription, you must ensure that the neighboring peers support MAC
flow control. If the peers do not support MAC flow control, then you must
disable flow control.
Flow control is enabled.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Flow Control on page 47
Configuring Gigabit Ethernet Interfaces (CLI Procedure)
Configuring Gigabit Ethernet Interfaces (CLI Procedure) on page 32
Chapter 3: Configuration Statements
181