Loopback (Aggregated Ethernet, Fast Ethernet, And Gigabit Ethernet) - Juniper EX2200 Hardware Manual

loopback (Aggregated Ethernet, Fast Ethernet, and Gigabit Ethernet)

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
(loopback | no-loopback);
[edit interfaces interface-name aggregated-ether-options],
[edit interfaces interface-name ether-options],
[edit interfaces interface-name fastether-options],
[edit interfaces interface-name gigether-options],
[edit interfaces interface-range name ether-options]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 12.2 for ACX Series Universal Access Routers.
For aggregated Ethernet, Fast Ethernet, Gigabit Ethernet, and 10-Gigabit Ethernet
interfaces, enable or disable loopback mode.
NOTE: By default, local aggregated Ethernet, Fast Ethernet, Tri-Rate Ethernet
copper, Gigabit Ethernet, and 10-Gigabit Ethernet interfaces connect to a
remote system.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Ethernet Loopback Capability on page 77
Chapter 3: Configuration Statements
205