Interface (Multichassis Protection) - Juniper EX2200 Hardware Manual

Network Interfaces for EX4300 Switches
Required Privilege
Level
Related
Documentation

interface (Multichassis Protection)

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
190
—Exclude the Layer 4 source port field from the hashing algorithm.
no-l4-source-port
—Exclude the Next Header field from the hashing algorithm.
no-next-header
—Include the VLAN ID field in the hashing algorithm.
vlan-id
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring the Fields in the Algorithm Used To Hash LAG Bundle and ECMP Traffic
(CLI Procedure) on page 94
Understanding the Algorithm Used to Hash LAG Bundle and Egress Next-Hop ECMP
Traffic on page 11
enhanced-hash-key on page 170
hash-mode on page 183
inet on page 187
interface interface-name;
[edit multi-chassis multi-chassis-protection peer]
Statement introduced in Junos OS Release 9.6 for MX Series routers.
Statement introduced in Junos OS Release 12.2 for the QFX Series.
Statement introduced in Junos OS Release 12.3R2 for EX Series switches.
Specify the name of the interface that is being used as an interchassis link-protection
link (ICL-PL). The two switches hosting a multichassis link aggregation group (MC-LAG)
use this link to pass Inter-Chassis Control Protocol (ICCP) and data traffic.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Copyright © 2015, Juniper Networks, Inc.