Supported Statements In The [Edit Interfaces Ae] Hierarchy Level - Juniper EX2200 Hardware Manual

[edit interfaces ae] Configuration Statement Hierarchy on EX Series Switches

Supported Statements in the [edit interfaces ae] Hierarchy Level

Copyright © 2015, Juniper Networks, Inc.
Junos OS Interfaces Fundamentals Configuration Guide
Junos OS Ethernet Interfaces Configuration Guide
This topic lists supported and unsupported configuration statements in the
ae] hierarchy level on EX Series switches.
Supported statements are those that you can use to configure some aspect of a
software feature on the switch.
Unsupported statements are those that appear in the command-line interface (CLI)
on the switch, but that have no effect on switch operation if you configure them.
Not all features are supported on all switch platforms. For detailed information about
feature support on specific EX Series switch platforms, see EX Series Switch Software
Features Overview.
This topic lists:
Supported Statements in the [edit interfaces ae] Hierarchy Level on page 109
Unsupported Statements in the [edit interfaces ae] Hierarchy Level on page 113
The following hierarchy shows the
on EX Series switches.
interfaces {
aeX {
accounting-profile name;
aggregated-ether-options {
ethernet-switch-profile {
tag-protocol-id identifiers;
}
(flow-control | no-flow-control);
lacp {
(active | passive);
link-protection {
disable;
(revertive | non-revertive);
}
periodic interval;
system-priority number;
}
(link-protection | no-link-protection);
link-speed speed;
local-bias;
(loopback | no-loopback);
minimum-links number;
rebalance-periodic;
}
description text;
Chapter 3: Configuration Statements
configuration statements supported
[edit interfaces ae]
[edit interfaces
109