Network Interfaces for EX4300 Switches
Default
Options
Required Privilege
Level
Related
Documentation
162
Autonegotiation is automatically enabled. No explicit action is taken after the
autonegotiation is complete or if the negotiation fails.
remote-fault (local-interface-online | local-interface-offline)
MX Series, T Series, TX Matrix routers, and ACX Series routers only, manually configure
remote fault on an interface.
Default:
local-interface-online
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Gigabit Ethernet Autonegotiation Overview
Configuring J Series Services Router Switching Interfaces
Configuring Gigabit Ethernet Interfaces (CLI Procedure)
Configuring Gigabit Ethernet Interfaces (CLI Procedure) on page 32
—(Optional) For M Series,
Copyright © 2015, Juniper Networks, Inc.