Show Interfaces Queue; Table 51: Show Interfaces Queue Output Fields - Juniper EX2200 Hardware Manual

show interfaces queue

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields

Table 51: show interfaces queue Output Fields

Field Name
Physical Interface and Forwarding Class Information
Physical interface
Copyright © 2015, Juniper Networks, Inc.
show interfaces queue
<both-ingress-egress>
<egress>
<forwarding-class forwarding-class>
<ingress>
<interface-name>
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display class-of-service (CoS) queue information for physical interfaces.
—Show detailed CoS queue statistics for all physical interfaces.
none
both-ingress-egress —(Optional) Show both ingress and egress queue statistics. (Ingress
statistics are not available for all interfaces.)
—(Optional) Show egress queue statistics only.
egress
forwarding-class forwarding-class
forwarding class.
—(Optional) Show ingress queue statistics only. (Ingress statistics are not available
ingress
for all interfaces.)
—(Optional) Show queue statistics for the specified interface.
interface-name
view
Monitoring Interface Status and Traffic on page 233
Monitoring Interfaces That Have CoS Components
Defining CoS Schedulers and Scheduler Maps (CLI Procedure)
Configuring CoS Traffic Classification for Ingress Queuing on Oversubscribed Ports on
EX8200 Line Cards (CLI Procedure)
show interfaces queue ge-0/0/0 (EX2200 Switch) on page 303
show interfaces queue xe-6/0/39 (Line Card with Oversubscribed Ports in an EX8200
Switch) on page 304
Table 51 on page 301 lists the output fields for the
fields are listed in the approximate order in which they appear.
Field Description
Name of the physical interface.
—(Optional) Show queue statistics only for the specified
show interfaces queue
Chapter 5: Operational Commands
command. Output
301