[Edit Interfaces Et] Configuration Statement Hierarchy On Ex Series; Switches; Supported Statements In The [Edit Interfaces Et] Hierarchy Level - Juniper EX2200 Hardware Manual

Network Interfaces for EX4300 Switches
Table 32: Unsupported [edit interfaces ae] Configuration Statements for EX Series
Switches (continued)
Statement
service
bandwidth-threshold
group
pop
push
Related
Documentation
[edit interfaces et] Configuration Statement Hierarchy on EX Series Switches

Supported Statements in the [edit interfaces et] Hierarchy Level

114
Hierarchy
[edit interfaces ae unit family inet6]
[edit interfaces ae unit family inet6 address vrrp-group track interface]
[edit interfaces ae unit family inet6 filter]
[edit interfaces ae unit input-vlan-map]
[edit interfaces ae unit output-vlan-map]
[edit interfaces] Configuration Statement Hierarchy on EX Series Switches on page 108
This topic lists supported and unsupported configuration statements in the
et] hierarchy level on EX Series switches.
Supported statements are those that you can use to configure some aspect of a
software feature on the switch.
Unsupported statements are those that appear in the command-line interface (CLI)
on the switch, but that have no effect on switch operation if you configure them.
Not all features are supported on all switch platforms. For detailed information about
feature support on specific EX Series switch platforms, see EX Series Switch Software
Features Overview.
This topic lists:
Supported Statements in the [edit interfaces et] Hierarchy Level on page 114
Unsupported Statements in the [edit interfaces et] Hierarchy Level on page 118
The following hierarchy shows the
on EX Series switches.
interfaces {
et-fpc/pic/port {
accounting-profile name;
description text;
disable;
encapsulation type;
ether-options {
802.3ad {
aex;
(backup | primary);
[edit interfaces et] configuration statements supported
Copyright © 2015, Juniper Networks, Inc.
[edit interfaces