Table 43: Monitor Interface Output Fields - Juniper EX2200 Hardware Manual

Junos osfor exseries ethernetswitches
Hide thumbs Also See for EX2200:
Table of Contents

Advertisement

Network Interfaces for EX4300 Switches

Table 43: monitor interface Output Fields

Field Name
Field Description
Hostname of the router.
router1
How long the monitor interface command has been running or how long since
Seconds
you last cleared the counters.
Time
Current time (UTC).
Delay x/y/z
Time difference between when the statistics were displayed and the actual
clock time.
x
—Time taken for the last polling (in milliseconds).
y
—Minimum time taken across all pollings (in milliseconds).
—Maximum time taken across all pollings (in milliseconds).
z
Short description of the interface, including its name, status, and encapsulation.
Interface
State of the link:
Link
Cumulative number for the counter in question since the time shown in the
Current delta
Seconds field, which is the time since you started the command or last cleared
the counters.
(Logical interfaces only) Number and rate of bytes and packets destined to the
Local Statistics
router or switch through the specified interface. When a burst of traffic is
received, the value in the output packet rate field might briefly exceed the peak
cell rate. It usually takes less than 1 second for this counter to stabilize.
Input bytes
Output bytes
Input packets
Output packets
Remote Statistics
(Logical interfaces only) Statistics for traffic transiting the router or switch.
When a burst of traffic is received, the value in the output packet rate field might
briefly exceed the peak cell rate. It usually takes less than 1 second for this
counter to stabilize.
Input bytes
Output bytes
Input packets
Output packets
246
,
, or
.
Up
Down
Test
—Number of bytes received on the interface.
—Number of bytes transmitted on the interface.
—Number of packets received on the interface.
—Number of packets transmitted on the interface.
—Number of bytes received on the interface.
—Number of bytes transmitted on the interface.
—Number of packets received on the interface.
—Number of packets transmitted on the interface.
Level of Output
All levels
All levels
All levels
All levels
All levels
All levels
All levels
All levels
All levels
Copyright © 2015, Juniper Networks, Inc.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents