Specifications Of Cables And Wires That Connect To Ports On The Front Panel In An Ex9251 Switch; Grounding Cable And Lug Specifications For Ex9251 Switches - Juniper EX9251 Hardware Manual

Table 25: Specifications of Cables to Connect to Management Devices
Ports
Mini-USB Type-B Console
port
Specifications of Cables and Wires That Connect to Ports on the Front
Panel in an EX9251 Switch
Table 26 on page 62 lists the specifications for the cables that connect to management port, console
port, and auxiliary port.
Table 26: Cable and Wire Specifications for Ports on the Front Panel
Port Cable Specification
Console or auxiliary port RS-232 (EIA-232) serial
cable
Management Ethernet Category 5 cable or
port equivalent suitable for
100Base-T operation

Grounding Cable and Lug Specifications for EX9251 Switches

IN THIS SECTION
Grounding Points Specifications for an EX9251 Switch | 63
Grounding Cable Specifications for an EX9251 Switch | 63
Grounding Lug Specifications for an EX9251 Switch | 64
Cable Specifications Receptacle
Mini-USB cable with Mini-USB
standard-A and Mini-USB
Type-B (5-pin) connector
Cable/Wire Supplied
1.83-m length with
RJ-45/DB-9 connectors
One 4.57-m length with
RJ-45/RJ-45 connectors
(Continued)
Additional Information
Maximum Length Receptacle
1.83 m RJ-45 socket
100 m RJ-45 autosensing
62