[Edit Interfaces Vme] Configuration Statement Hierarchy On Ex Series; Switches; Supported Statements In The [Edit Interfaces Vme] Hierarchy Level - Juniper EX2200 Hardware Manual

Network Interfaces for EX4300 Switches
Table 38: Unsupported [edit interfaces me] Configuration Statements for EX Series
Switches (continued)
Statement
vrrp-group
service
vrrp-inet6-group
Related
Documentation
[edit interfaces vme] Configuration Statement Hierarchy on EX Series Switches

Supported Statements in the [edit interfaces vme] Hierarchy Level

144
Hierarchy
[edit interfaces me unit family inet address]
[edit interfaces me unit family inet6]
[edit interfaces me unit family inet6 address]
[edit interfaces] Configuration Statement Hierarchy on EX Series Switches
[edit interfaces] Configuration Statement Hierarchy on EX Series Switches on page 108
This topic lists supported and unsupported configuration statements in the
vme] hierarchy level on EX Series switches.
Supported statements are those that you can use to configure some aspect of a
software feature on the switch.
Unsupported statements are those that appear in the command-line interface (CLI)
on the switch, but that have no effect on switch operation if you configure them.
Not all features are supported on all switch platforms. For detailed information about
feature support on specific EX Series switch platforms, see EX Series Switch Software
Features Overview.
This topic lists:
Supported Statements in the [edit interfaces vme] Hierarchy Level on page 144
Unsupported Statements in the [edit interfaces vme] Hierarchy Level on page 147
The following hierarchy shows the
supported on EX Series switches.
interfaces {
vme {
accounting-profile name;
description text;
disable;
(gratuitous-arp-reply
hold-time up milliseconds down milliseconds;
mtu bytes;
no-gratuitous-arp-request;
traceoptions {
flag flag;
}
(traps | no-traps);
[edit interfaces vme]
| no-gratuitous-arp-reply);
[edit interfaces
configuration statements
Copyright © 2015, Juniper Networks, Inc.