Preferred - Juniper EX2200 Hardware Manual

Network Interfaces for EX4300 Switches

preferred

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
216
preferred;
[edit interfaces interface-name unit logical-unit-number family family address address],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
family family address address]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 11.1 for the QFX Series.
Configure this address to be the preferred address on the interface. If you configure more
than one address on the same subnet, the preferred source address is chosen by default
as the source address when you initiate frame transfers to destinations on the subnet.
NOTE: The edit logical-systems
The lowest-numbered address on the subnet is the preferred address.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring the Interface Address on page 48
hierarchy is not available on QFabric systems.
Copyright © 2015, Juniper Networks, Inc.