Configuration Tasks; Chapter 2 Configuration Tasks - Juniper EX2200 Hardware Manual

CHAPTER 2

Configuration Tasks

Copyright © 2015, Juniper Networks, Inc.
Configuring Gigabit Ethernet Interfaces (CLI Procedure) on page 32
Configuring Gigabit Ethernet Interfaces (J-Web Procedure) on page 35
Port Role Configuration with the J-Web Interface (with CLI References) on page 41
Adding a Logical Unit Description to the Configuration on page 45
Disabling a Physical Interface on page 45
Disabling a Logical Interface on page 47
Configuring Flow Control on page 47
Configuring the Interface Address on page 48
Configuring the Interface Bandwidth on page 52
Configuring the Media MTU on page 53
Setting the Protocol MTU on page 65
Interface Ranges on page 66
Configuring Accounting for the Physical Interface on page 74
Configuring Accounting for the Logical Interface on page 76
Configuring Ethernet Loopback Capability on page 77
Configuring Gratuitous ARP on page 78
Configuring Static ARP Table Entries on page 79
Disabling the Transmission of Redirect Messages on an Interface on page 80
Configuring Restricted and Unrestricted Proxy ARP on page 80
Enabling or Disabling SNMP Notifications on Logical Interfaces on page 81
Configuring Aggregated Ethernet Links (CLI Procedure) on page 82
Configuring Aggregated Ethernet Interfaces (J-Web Procedure) on page 83
Configuring Aggregated Ethernet LACP (CLI Procedure) on page 86
Configuring LACP Link Protection of Aggregated Ethernet Interfaces (CLI
Procedure) on page 87
Configuring Aggregated Ethernet Link Protection on page 89
Configuring Aggregated Ethernet Link Speed on page 90
Configuring Aggregated Ethernet Minimum Links on page 92
31