Broadcast - Juniper EX2200 Hardware Manual

Network Interfaces for EX4300 Switches

broadcast

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
164
broadcast address;
[edit interfaces interface-name unit logical-unit-number family family address address],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
family family address address]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 11.1 for the QFX Series.
Set the broadcast address on the network or subnet. On a subnet you cannot specify a
host address of 0, nor can you specify a broadcast address.
The default broadcast address has a host portion of all ones.
—Broadcast address. The address must have a host portion of either all ones or
address
all zeros. You cannot specify the addresses
NOTE: The
edit logical-systems
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring the Interface Address on page 48
0.0.0.0 or 255.255.255.255
hierarchy is not available on QFabric systems.
Copyright © 2015, Juniper Networks, Inc.
.