Juniper EX2200 Hardware Manual page 216

Network Interfaces for EX4300 Switches
Required Privilege
Level
Related
Documentation
196
NOTE: You must also configure multichassis link aggregation (MC-LAG)
when you configure the
fast-failover —Specify to override the IEEE 802.3ad standard and allow the standby link
to receive traffic. Overriding the default behavior facilitates subsecond failover.
—Respond to LACP packets.
passive
The remaining statements are explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Aggregated Ethernet LACP
Configuring Aggregated Ethernet LACP (CLI Procedure) on page 86
Example: Configuring Aggregated Ethernet High-Speed Uplinks with LACP Between an
EX4200 Virtual Chassis Access Switch and an EX4200 Virtual Chassis Distribution Switch
admin-key .
Copyright © 2015, Juniper Networks, Inc.