Ethernet (Aggregated Devices); Eui-64 - Juniper EX2200 Hardware Manual

ethernet (Aggregated Devices)

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation

eui-64

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2015, Juniper Networks, Inc.
ethernet {
device-count number;
lacp {
link-protection {
non-revertive;
}
system-priority;
}
[edit chassis aggregated-devices]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure properties for Ethernet aggregated devices on the switch.
The remaining statement is explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Aggregated Ethernet Links (CLI Procedure) on page 82
Configuring LACP Link Protection of Aggregated Ethernet Interfaces (CLI Procedure)
on page 87
Junos OS Ethernet Interfaces Configuration Guide
eui-64;
[edit interfaces interface-name unit number family inet6 address address]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Statement introduced in Junos OS Release 12.2 for the QFX Series.
For interfaces that carry IP version 6 (IPv6) traffic, automatically generate the host
number portion of interface addresses.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring the Interface Address on page 48
Chapter 3: Configuration Statements
173