Leds On The Rj-45 Network Ports, Virtual Chassis Ports, And Uplink Ports On Ex4100 And Ex4100-F Switches - Juniper EX4100 Hardware Manual

Table 8: LEDs on the Management Port on EX4100 and EX4100-F Switches
LED
Status
LEDs on the RJ-45 Network Ports, Virtual Chassis Ports, and Uplink Ports
on EX4100 and EX4100-F Switches
IN THIS SECTION
LEDs on the Network Ports | 48
The RJ-45 network ports, SFP+ uplink ports, and SFP+/SFP28 Virtual Chassis Ports on EX4100 and
EX4100-F switches have LEDs that show the link activity and port status.
LEDs on the Network Ports
The figures in this section show and describe the LEDs on the following ports:
• Figure 38 on page 49 shows the LEDs on the RJ-45 network ports on EX4100 and EX4100-F
switches.
• Figure 39 on page 49 shows the LEDs on the SFP+ uplink ports.
• Figure 40 on page 50 shows the LEDs on the SFP+/SFP28 Virtual Chassis Ports.
Color
Green
(Continued)
State and Description
Indicates the speed:
•
On steadily—Link speed is
1000 Mbps.
•
On steadily—Link speed is
100 Mbps.
•
Off—Link speed is 10 Mbps.
48